[Weather] Windspeed Calibration in oww

[Steve Hendrix]

At 2007-04-24 16:28, you wrote:
>I have a AAG v3 weather station fairly new from hobby-boards and 
>what I am seeing is roughly half the actual wind speed being 
>reported in owwwnogui running on a linksys slug. How do I calibrate 
>the wind speed within the application so that it will record an 
>accurate wind speed.

That sounds like one of the two magnets on the anemometer board is 
missing, so it's expecting two clicks per turn but seeing only one.

Steve Hendrix