[Weather] termperature offset on Dalsemi station

[Ernie Oporto]

You can see at the link below that my Dalsemi station seems to send data
that is 7-10 degrees off from other stations around me.  Most of the time
this is because my station is in the shade due to my condo complex's rules
about where I can mount things.  Of course, at night, we are all in the
shade and the temperature difference is still there.  This is one of the
original dalsemi 1-wire stations.

http://www.findu.com/cgi-bin/wxnear.cgi?call=CW0861

Surprisingly, the Trh in my humidity sensor (one of the original humidity
sensors that were sent out in samples) seems to show the right temperature.
I'm sure I can fudge OWW to read the temp from the humidity sensor for
sending to findu.com, but I'd like to see if I can get to the root of the
problem and correct the temp.  Is there any known issue I should be looking
for that might cause this?  Any recommendations?


-- 
Ernie
http://www.shokk.com/blog/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www2.buoy.com/pipermail/weather/attachments/20070330/525b29d7/attachment.htm