[Weather] Request for information

[Corey Touchet]

I've gone the home built route.  Currently finishing my radiation shield for
the therm and the mast is pretty much complete.  I used a 1/2" galvanized
steel pipe painted white which will be clamped to the chimney.  I've mounted
the anemometer and have modified the rain gauge to mount on the end of a
pipe that screws into a t section.  I just need to let the paint dry and
work out the grounding details.  I've got 2 grounding rods and I'm thinking
of using the one that is not being used rather than grounding it to my
telecom/power ground.

Any thoughts on that?


I also bought all my parts from hobby-boards, will be getting a baro here
soon once the mast is up.

On 5/5/07, Claude Felizardo <cafelizardo at usa.net> wrote:
>
> Aaron Wasilewski wrote:
> >
> > What are some of the best resources for purchasing the base system
> > (wind speed/direction/temp)?
> >
> >
> >
> > I have seen many on the www but the pricing is all over the place.
> >
> >
> >
> > Regards
> >
>
> I'm still using my original Dallas weather station which does the
> basics.  As other's have mentioned, you can get the AAG version from
> either Hobby-Boards or AAG direct.  I've ordered several times from both
> and have been happy each time.
>
> http://www.aag.com.mx/
> http://www.hobby-boards.com/
>
> If you are interested in learning more about the home built route, I
> recommend Tim Bitson's "Weather Toys" book which is available at
> hobby-boards.  I wish it was available when I first got into this.
>
> And don't forget to pick up a 1-wire adapter to hook it up to your
> computer!
>
> claude
>
>
> _______________________________________________
> Weather mailing list
> Weather at buoy.com
> http://www2.buoy.com/cgi-bin/mailman/listinfo/weather
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www2.buoy.com/pipermail/weather/attachments/20070505/aff54d7d/attachment.htm